Core QT wallet - Setup, Backup, Encrypt, Debug & private ...

Stakenet (XSN) - A DEX with interchain capabilities (BTC-ETH), Huge Potential [Full Writeup]

Preface
Full disclosure here; I am heavily invested in this. I have picked up some real gems from here and was only in the position to buy so much of this because of you guys so I thought it was time to give back. I only invest in Utility Coins. These are coins that actually DO something, and provide new/build upon the crypto infrastructure to work towards the end goal that Bitcoin itself set out to achieve(financial independence from the fiat banking system). This way, I avoid 99% of the scams in crypto that are functionless vapourware, and if you only invest in things that have strong fundamentals in the long term you are much more likely to make money.
Introduction
Stakenet is a Lightning Network-ready open-source platform for decentralized applications with its native cryptocurrency – XSN. It is powered by a Proof of Stake blockchain with trustless cold staking and Masternodes. Its use case is to provide a highly secure cross-chain infrastructure for these decentralized applications, where individuals can easily operate with any blockchain simply by using Stakenet and its native currency XSN.
Ok... but what does it actually do and solve?
The moonshot here is the DEX (Decentralised Exchange) that they are building. This is a lightning-network DEX with interchain capabilities. That means you could trade BTC directly for ETH; securely, instantly, cheaply and privately.
Right now, most crypto is traded to and from Centralised Exchanges like Binance. To buy and sell on these exchanges, you have to send your crypto wallets on that exchange. That means the exchanges have your private keys, and they have control over your funds. When you use a centralised exchange, you are no longer in control of your assets, and depend on the trustworthiness of middlemen. We have in the past of course seen infamous exit scams by centralised exchanges like Mt. Gox.
The alternative? Decentralised Exchanges. DEX's have no central authority and most importantly, your private keys(your crypto) never leavesYOUR possession and are never in anyone else's possession. So you can trade peer-to-peer without any of the drawbacks of Centralised Exchanges.
The problem is that this technology has not been perfected yet, and the DEX's that we have available to us now are not providing cheap, private, quick trading on a decentralised medium because of their technological inadequacies. Take Uniswap for example. This DEX accounts for over 60% of all DEX volume and facilitates trading of ERC-20 tokens, over the Ethereum blockchain. The problem? Because of the huge amount of transaction that are occurring over the Ethereum network, this has lead to congestion(too many transaction for the network to handle at one time) so the fees have increased dramatically. Another big problem? It's only for Ethereum. You cant for example, Buy LINK with BTC. You must use ETH.
The solution? Layer 2 protocols. These are layers built ON TOP of existing blockchains, that are designed to solve the transaction and scaling difficulties that crypto as a whole is facing today(and ultimately stopping mass adoption) The developers at Stakenet have seen the big picture, and have decided to implement the lightning network(a layer 2 protocol) into its DEX from the ground up. This will facilitate the functionalities of a DEX without any of the drawbacks of the CEX's and the DEX's we have today.
Heres someone much more qualified than me, Andreas Antonopoulos, to explain this
https://streamable.com/kzpimj
'Once we have efficient, well designed DEX's on layer 2, there wont even be any DEX's on layer 1'
Progress
The Stakenet team were the first to envision this grand solution and have been working on it since its conception in June 2019. They have been making steady progress ever since and right now, the DEX is in an open beta stage where rigorous testing is constant by themselves and the public. For a project of this scale, stress testing is paramount. If the product were to launch with any bugs/errors that would result in the loss of a users funds, this would obviously be very damaging to Stakenet's reputation. So I believe that the developers conservative approach is wise.
As of now the only pairs tradeable on the DEX are XSN/BTC and LTC/BTC. The DEX has only just launched as a public beta and is not in its full public release stage yet. As development moves forward more lightning network and atomic swap compatible coins will be added to the DEX, and of course, the team are hard at work on Raiden Integration - this will allow ETH and tokens on the Ethereum blockchain to be traded on the DEX between separate blockchains(instantly, cheaply, privately) This is where Stakenet enters top 50 territory on CMC if successful and is the true value here. Raiden Integration is well underway is being tested in a closed public group on Linux.
The full public DEX with Raiden Integration is expected to release by the end of the year. Given the state of development so far and the rate of progress, this seems realistic.
Tokenomics
2.6 Metrics overview (from whitepaper)
XSN is slightly inflationary, much like ETH as this is necessary for the economy to be adopted and work in the long term. There is however a deflationary mechanism in place - all trading fees on the DEX get converted to XSN and 10% of these fees are burned. This puts constant buying pressure on XSN and acts as a deflationary mechanism. XSN has inherent value because it makes up the infrastructure that the DEX will run off and as such Masternode operators and Stakers will see the fee's from the DEX.
Conclusion
We can clearly see that a layer 2 DEX is the future of crypto currency trading. It will facilitate secure, cheap, instant and private trading across all coins with lightning capabilities, thus solving the scaling and transaction issues that are holding back crypto today. I dont need to tell you the implications of this, and what it means for crypto as a whole. If Stakenet can launch a layer 2 DEX with Raiden Integration, It will become the primary DEX in terms of volume.
Stakenet DEX will most likely be the first layer 2 DEX(first mover advantage) and its blockchain is the infrastructure that will host this DEX and subsequently receive it's trading fee's. It is not difficult to envision a time in the next year when Stakenet DEX is functional and hosting hundreds of millions of dollars worth of trading every single day.
At $30 million market cap, I cant see any other potential investment right now with this much potential upside.
This post has merely served as in introduction and a heads up for this project, there is MUCH more to cover like vortex liquidity, masternodes, TOR integration... for now, here is some additional reading. Resources
TLDR; No. Do you want to make money? I'd start with learning how to read.
submitted by hotprocession to CryptoMoonShots [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

https://preview.redd.it/3t3z6hkbxel31.png?width=1920&format=png&auto=webp&s=ac989c2752c726e10d2291eb271721ceaa332a30

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.

https://preview.redd.it/xew1eu1exel31.png?width=1558&format=png&auto=webp&s=df960ded46d40fc9bf0ae8b54ff3b3b86276708a
Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.

https://preview.redd.it/pe166qyexel31.png?width=1561&format=png&auto=webp&s=d4c982089276e64cd909537c9ce744b59e168b6d
Some problems with these methods:
  • They add a lot of Overhead / Latency. Rather than just having the consensus of Blockchain A and B, you add the consensus mechanism of the Interoperability Blockchain as well.
  • Decentralisation / transaction security is reduced. If Blockchain A and Blockchain B each have 1,000 nodes validating transactions, yet the Interoperability Blockchain only has 100 nodes then you have reduced the security of the transaction from being validated by 1000 to validated by 100.
  • Security of the Interoperability Blockchain must be greater than the sum of all transactions going through it. JP Morgan transfer $6 Trillion every day, if they move that onto blockchain and need interoperability between two Permissioned blockchains that have to connect via a public Interoperability blockchain, then it would always have to be more costly to attack the blockchain than the value from stealing the funds transacted through the blockchain.
  • Imposes a lot of limitations on connected blockchains to fork their code which may mean they have to drop some existing functionality as well as prevent them from adding certain features in the future.
  • Creates a single point of failure — If the Interoperability blockchain or connector has an issue then this affects each connected blockchain.
  • It doesn’t scale and acts as a bottleneck. Not only does building complex custom connectors not scale but the Interoperability blockchain that they are forcing all transactions to go through has to be faster than the combined throughput of connected blockchains. These Interoperability blockchains have limited tps, with the most being around 200 and is a trade off between performance and decentralisation.

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.

https://preview.redd.it/yz2wvnhgxel31.png?width=1070&format=png&auto=webp&s=e6cb66e362b18e9924245a6a99e0eac4c9083308
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

https://preview.redd.it/2cwj4k7hxel31.png?width=1169&format=png&auto=webp&s=d6fc49086f944089cef7ffa1dfc9d284107ad2e3

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against?Cerf: I’m not surprised at all because we designed it to do that.This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else.We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked.And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned.We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets.We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

https://preview.redd.it/1lpt98cixel31.png?width=1126&format=png&auto=webp&s=3928cf66cfe25bfce7dc84be7b6db670ac952ccf

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert

https://preview.redd.it/1x25xg78efl31.png?width=566&format=png&auto=webp&s=abea981ff40355eed2d0e3be1ca414c5b1b8573c
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
https://twitter.com/gverdian/status/1151549142235340800
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to QuantNetwork [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

https://preview.redd.it/30jclqe3wel31.png?width=1920&format=png&auto=webp&s=2bcce5d296c3a287dccdd28b72877ca9e03a5f31

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.
https://preview.redd.it/2apm3pb5wel31.png?width=1558&format=png&auto=webp&s=7027514706d7b12690b1be8f4f4af7cfc9c43354
Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.

https://preview.redd.it/4axzxx57wel31.png?width=1561&format=png&auto=webp&s=a8c3de8468ef9b67bc1db75cffbef81ef8c0aa70
Some problems with these methods:
  • They add a lot of Overhead / Latency. Rather than just having the consensus of Blockchain A and B, you add the consensus mechanism of the Interoperability Blockchain as well.
  • Decentralisation / transaction security is reduced. If Blockchain A and Blockchain B each have 1,000 nodes validating transactions, yet the Interoperability Blockchain only has 100 nodes then you have reduced the security of the transaction from being validated by 1000 to validated by 100.
  • Security of the Interoperability Blockchain must be greater than the sum of all transactions going through it. JP Morgan transfer $6 Trillion every day, if they move that onto blockchain and need interoperability between two Permissioned blockchains that have to connect via a public Interoperability blockchain, then it would always have to be more costly to attack the blockchain than the value from stealing the funds transacted through the blockchain.
  • Imposes a lot of limitations on connected blockchains to fork their code which may mean they have to drop some existing functionality as well as prevent them from adding certain features in the future.
  • Creates a single point of failure — If the Interoperability blockchain or connector has an issue then this affects each connected blockchain.
  • It doesn’t scale and acts as a bottleneck. Not only does building complex custom connectors not scale but the Interoperability blockchain that they are forcing all transactions to go through has to be faster than the combined throughput of connected blockchains. These Interoperability blockchains have limited tps, with the most being around 200 and is a trade off between performance and decentralisation.

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.

https://preview.redd.it/myjx8t29wel31.png?width=1070&format=png&auto=webp&s=550ac862c3c5b46df8ed42cf37282cad0a960819
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

https://preview.redd.it/m9036lzfwel31.png?width=1169&format=png&auto=webp&s=50e54198a97106b3921f79ca928f7e808a5529d7

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
***Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against?***Cerf: I’m not surprised at all because we designed it to do that.This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else.We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked.And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned.We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets.We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

https://preview.redd.it/6x7tjq9jwel31.png?width=1126&format=png&auto=webp&s=52ac5b9ebb45908ef6070d2eed6d107d380da1df

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert

https://preview.redd.it/wj5ubgv4efl31.png?width=566&format=png&auto=webp&s=2c0cb650f6aceae3d133beefdac04ba0aeea63f6
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
https://preview.redd.it/7zlrragqffl31.png?width=578&format=png&auto=webp&s=36980e86da6d050f086eb2171f679ac1716f97dc
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to CryptoCurrency [link] [comments]

What is Quant Networks Blockchain Operating System, Overledger? And why are Enterprises adopting it at mass scale?

Won't let me post the related images here, but please refer to this article which includes them https://medium.com/@CryptoSeq/what-is-a-blockchain-operating-system-and-what-are-the-benefits-c561d8275de6
Overledger is the world’s first blockchain operating system (OS) that not only inter-connects blockchains but also existing enterprise platforms, applications and networks to blockchain and facilitates the creation of internet scale multi-chain applications otherwise known as mApps.
In less than 10 months since launching Overledger they have provided interoperability with the full range of DLT technologies from all the leading Enterprise Permissioned blockchains such as Hyperledger, R3’s Corda, JP Morgan’s Quorum, permissioned variants of Ethereum and Ripple (XRPL) as well as the leading Public Permissionless blockchains / DAGs such as Bitcoin, Stellar, Ethereum, IOTA and EOS as well as the most recent blockchain to get added Binance Chain. In addition, Overledger also connects to Existing Networks / Off Chain / Oracle functionality and it does all of this in a way that is hugely scalable, without imposing restrictions / requiring blockchains to fork their code and can easily integrate into existing applications / networks by just adding 3 lines of code.

What is a blockchain Operating system?

You will be familiar with Operating systems such as Microsoft Windows, Apple Mac OS, Google’s Android etc but these are all Hardware based Operating Systems. Hardware based Operating Systems provide a platform to build and use applications that abstracts all of the complexities involved with integrating with all the hardware resources such as CPU, Memory, Storage, Mouse, Keyboard, Video etc so software can easily integrate with it. It provides interoperability between the Hardware devices and Software.
Overledger is a Blockchain Operating System, it provides a platform to build and use applications that abstracts all of the complexities involved with integrating with all the different blockchains, different OP_Codes being used, messaging formats etc as well as connecting to existing non-blockchain networks. It provides interoperability between Blockchains, Existing Networks and Software / MAPPs

How is Overledger different to other interoperability projects?

Other projects are trying to achieve interoperability by adding another blockchain on top of existing blockchains. This adds a lot of overhead, complexity, and technical risk. There are a few variants but essentially they either need to create custom connectors for each connected blockchain and / or require connected chains to fork their code to enable interoperability. An example of the process can be seen below:
User sends transaction to a multi sig contract on Blockchain A, wait for consensus to be reached on Blockchain A
A custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the smart contract on Blockchain A. Once they see the transaction, they then sign a transaction on the Interoperability blockchain as proof the event has happened on Blockchain A.
Wait for consensus to be reached on the Interoperability Blockchain.
The DAPP running on the Interoperability Blockchain is then updated with the info about the transaction occurring on Blockchain A and then signs a transaction on the Interoperability blockchain to a multi sig contract on the Interoperability Blockchain.
Wait for consensus to be reached on the interoperability Blockchain.
A different custom connector consisting of Off Chain Relay Nodes are monitoring transactions sent to the Smart Contract on the Interoperability Blockchain which are destined for Blockchain B. Once they see the transaction, they sign a transaction on Blockchain B. Wait for consensus to be reached on Blockchain B.

Other solutions require every connecting blockchain to fork their code and implement their Interoperability protocol. This means the same type of connector can be used instead of a custom one for every blockchain however every connected blockchain has to fork their code to implement the protocol. This enforces a lot of restrictions on what the connected blockchains can implement going forward.
Some problems with these methods:

But some Interoperability blockchains say they are infinitely scalable?

If the interoperability blockchain is limited to say 200 tps then the idea is to just have multiple instances of the blockchain and run them in parallel, so you benefit from the aggregated tps, but just how feasible is that? Lets say you want to connect Corda (capable of 2000+ tps) to Hyperledger (capable of up to 20,000 tps with recent upgrade). (Permissioned blockchains such as Hyperledger and Corda aren’t one big blockchain like say Bitcoin or Ethereum, they have separate instances for each consortium and each is capable of those speeds). So even when you have just 1 DAPP from one consortium that wants to connect Corda to Hyperledger and use 2000 tps for their DAPP, you would need 100 instances of the Interoperability blockchain, each with their own validators (which maybe 100–200 nodes each). So, 1 DAPP would need to cover the costs for 100 instances of the blockchain and running costs for 10,000 nodes…This is just one DAPP connected to one instance of a two permissioned blockchains, which are still in the early stages. Other blockchains such as Red Belly Blockchain can achieve 440,000 tps, and this will surely increase as the technology matures. There is also the added complexity of then aggregating the results / co-coordinating between the different instances of the blockchain. Then there are the environmental concerns, the power required for all of these instances / nodes is not sustainable.
It’s not just transactions per second of the blockchain as well, its the latency of all these added consensuses along the path to reach to the destination and not knowing whether the security of each of the hops is sufficient and can be trusted. To see examples of how this potential issue as well as others effect Cosmos you can see my article here. I recommend also reading a blog done by the CEO of Quant, Gilbert Verdian, which explains how Overledger differs here as well as detailed in the whitepaper here.

Overledger’s approach

In 1973 Vint Cerf invented the protocol that rules them all: TCP/IP. Most people have never heard of it. But it describes the fundamental architecture of the internet, and it made possible Wi-Fi, Ethernet, LANs, the World Wide Web, e-mail, FTP, 3G/4G — as well as all of the inventions built upon those inventions.
Wired: So from the beginning, people, including yourself, had a vision of where the internet was going to go. Are you surprised, though, that at this point the IP protocol seems to beat almost anything it comes up against? Cerf: I’m not surprised at all because we designed it to do that. This was very conscious. Something we did right at the very beginning, when we were writing the specifications, we wanted to make this a future-proof protocol. And so the tactic that we used to achieve that was to say that the protocol did not know how — the packets of the internet protocol layer didn’t know how they were being carried. And they didn’t care whether it was a satellite link or mobile radio link or an optical fiber or something else. We were very, very careful to isolate that protocol layer from any detailed knowledge of how it was being carried. Plainly, the software had to know how to inject it into a radio link, or inject it into an optical fiber, or inject it into a satellite connection. But the basic protocol didn’t know how that worked. And the other thing that we did was to make sure that the network didn’t know what the packets had in them. We didn’t encrypt them to prevent it from knowing — we just didn’t make it have to know anything. It’s just a bag of bits as far as the net was concerned. We were very successful in these two design features, because every time a new kind of communications technology came along, like frame relay or asynchronous transfer mode or passive optical networking or mobile radio‚ all of these different ways of communicating could carry internet packets. We would hear people saying, ‘The internet will be replaced by X25,’ or ‘The internet will be replaced by frame relay,’ or ‘The internet will be replaced by APM,’ or ‘The internet will be replaced by add-and-drop multiplexers.’ Of course, the answer is, ‘No, it won’t.’ It just runs on top of everything. And that was by design. I’m actually very proud of the fact that we thought of that and carefully designed that capability into the system.
This is the approach Quant have taken with their Blockchain OS, Overledger to solve Blockchain interoperability. Compared to other Interoperability platforms that are trying to achieve interoperability at the transaction layer by connecting two blockchains via another blockchain, these will be ultimately be made redundant once faster methods are released. Overledger is designed to be future proof by isolating the layers so it doesn’t matter whether it’s a permissioned blockchain, permissionless, DAG, Legacy network, POW, POS etc because it abstracts the transaction layer from the messaging layer and runs on top of blockchains. Just as the Internet wasn’t replaced by X25, frame relay, APM etc, Overledger is designed to be future proof as it just runs on top of the Blockchains rather than being a blockchain itself. So, if a new blockchain technology comes out that is capable of 100,000 TPS then it can easily be integrated as Overledger just runs on top of it.
Likewise, with protocols such as HTTPS, SSH etc these will also emerge for blockchains such as ZK-Snarks and other privacy implementations as well as other features made available, all will be compatible with Overledger as its just sitting on top rather than forcing their own implementation for all.
It doesn’t require blockchains to fork their code to make it compatible, it doesn’t add the overhead of adding another blockchain with another consensus mechanism (most likely multiple as it has to go through many hops). All of this adds a lot of latency and restrictions which isn’t needed. The developer can just choose which blockchains they want to connect and use the consensus mechanisms of those blockchains rather than forced to use one.
Overledger can provide truly internet scale to meet whatever the demands may be, whether that be connecting multiple red belly blockchains together with 440,000 tps it doesn’t matter as it doesn’t add its consensus mechanism and uses proven internet scale technology such as that based on Kubernetes, which is where each task is split up into a self-contained container and each task is scaled out by deploying more to meet demand. Kubernetes is what runs Google Search engine where they scale up and down billions of containers every week.
Due to this being more of a summary, I strongly recommend you read this article which goes into detail about the different layers in Overledger.

But how does it provide the security of a blockchain if it doesn’t add its own blockchain?

This is often misunderstood by people. Overledger is not a blockchain however it still uses a blockchain for security, immutability, traceability etc, just rather than force people to use their own blockchain, it utilises the source and destination blockchains instead. The key thing to understand is the use of its patented technology TrustTag, which was made freely available to anyone with the Overledger SDK.
Please see this article which explains TrustTag in detail with examples showing how hashing / digital signatures work etc
A quick overview is if i want to send data from one blockchain to another the Overledger SDK using Trusttag will put the data through a hashing algorithm. The Hash is then included in digital signature as part of the transaction which is signed by the user’s private key and then validated through normal consensus and stored as metadata on the source blockchain. The message is then sent to the MAPP off chain. The MAPP periodically scans the blockchains and puts the received message through a hashing algorithm and compares the Hash to the one stored as metadata on the blockchain. This ensures that the message hasn’t been modified in transit, the message is encrypted and only the Hash is stored on chain so completely private, provides immutability as it was signed by the user’s private key which only they have and is stored on the blockchain for high availability and secure so that it can’t be modified, with the ability to refer back to it at any point in time.
Despite Overledger being a very secure platform, with the team having a very strong security background such as Gilbert who was chief security information officer for Vocalink (Bank of England) managing £6 trillion of payments every year and classified as national critical security (highest level you can get), ultimately you don’t need to trust Overledger. Transactions are signed and encrypted at client side, so Overledger has no way of being able to see the contents. It can’t modify any transaction as the digital signature which includes a hash of the transaction would be different so would get rejected. Transaction security isn’t reduced as it is signed at source using however many nodes the source blockchain has rather than a smaller amount of nodes with an interoperability blockchain in the middle.

Patents

The core code of Overledger is closed source and patented, one of the recent patents can be seen here, along with TrustTag and further ones are being filed. The Overledger SDK is open source and is available in Java and Javascript currently, with plans to support Pyhton and Ruby in the near future. Java and Javascript are the most popular programming languages used today.
The Blockchain connectors are also open source and this allows the community to create connectors to connect their favourite blockchain so that it can benefit from blockchain interoperability and making it available to all enterprises / developers currently utilising Overledger. Creating is currently taking around a week to implement and so far, have been added based upon client demand.

Multi Chain Applications (MAPPs)

Multi Chain Applications (MAPPs) enable an application to use multiple blockchains and interoperate between them. Treaty Contracts enable a developer to build a MAPP and then change the underlying blockchain it uses with just a quick change of couple of lines of code. This is vital for enterprises as it’s still early days in Blockchian and we don’t know which are going to be the best blockchain in the future. Overledger easily integrates into existing applications using the Overledger SDK by just adding 3 lines of code. They don’t need to completely rewrite the application like you do with the majority of other projects and all existing java / javascript apps on Windows / Mobile app stores / business applications etc can easily integrate with overledger with minimal changes in just 8 minutes.

Treaty Contracts

What Overledger will allow with Treaty contracts is to use popular programming languages such as Java and create a smart contract in Overledger that interacts with all of the connected blockchains. Even providing Smart contract functionality to blockchains that don’t support them such as Bitcoin. This means that developers don’t have to create all the smart contracts on each blockchain in all the different programming languages but instead just create them in Overledger using languages such as Java that are widely used today. If they need to use a different blockchain then it can be as easy as changing a line of code rather than having to completely rewrite the smart contracts.
Overledger isn’t a blockchain though, so how can it trusted with the smart contract? A Hash of the smart contract is published on any blockchain the MAPP developer requires and when called the smart contract is run its run through a hashing function to check that it matches the Hash value stored on the blockchain, ensuring that it has not been modified.
By running the Smart contract off chain this also increases Scalability enormously. With a blockchain all nodes have to run the smart contract one after another rather than in parallel. Not only do you get the performance benefit of not having to run the code against every single node but you can also run them in parallel to others executing smart contracts.
You can read more about Treaty Contracts here

The different versions of Overledger

Enterprise version

The current live version is the Enterprise version as that is where most of the adoption is taking place in blockchain due to permissioned blockchains being preferred until permissionless blockchains resolve the scalability, privacy and regulatory issues. Please see this article which goes into more details about Entereprise blockchain / adoption. The Enterprise version connects to permissioned blockchains as well as additional features / support suited for Enterprises.

Community version

The community version is due to be released later this year which will allow developers to benefit from creating MAPPs across permissionless blockchains. Developers can publish their MAPPs on the MAPP Store to create additional revenue streams for developers.

Where does Overledger run from? Is it Centralised?

Overledger can run from anywhere. The community version will have instances across multiple public clouds, Enterprises / developers may prefer to host the infrastructure themselves within a consortium which they can and are doing. For example SIA is the leading private Financial Network provider in Europe, it provides a dedicated high speed network which connects all the major banks, central banks, trading venues etc. SIA host Overledger within their private network so that all of those clients can access it in the confinement of their heavily regulated, secure, fast network. AUCloud / UKCLoud host Overledger in their environment to offer as a service to their clients which consist of Governments and critical national infrastructure.
For Blockchain nodes that interact with Overledger the choice is entirely up to the developer. Each member within a consortium may choose to host a node, some developers may prefer to use 3rd party hosting providers such as Infura, or Quant can also host them if they prefer, its entirely their choice.
Overledger allows for higher levels of decentralisation by storing the output across multiple blockchains so you not only benefit from the decentralisation of one blockchain but the combination of all of them. Ultimately though decentralisation is thrown around too much without many actually understanding what it means. It’s impossible to have complete decentralisation, when you sign a transaction to be added to a blockchain ultimately you still connect through a single ISP, connect through a single router, or the input into a transaction is done through a piece of software etc. What matters to be decentralised is where trust is involved. As i have mentioned before you don’t need to trust the OS, it’s just providing instructions on how to interact with the blockchains, the end user is signing the transactions / encrypting at client side. Nothing can be seen or modified with the OS. Even if somehow the transaction did get modified then it would get rejected when consensus is done as the hash / digital signature won’t match at the destination blockchain. Where the transaction actually gets put onto the blockchain is where decentralisation matters, because thats what needs to be trusted and conensus is reached and Overledger enables this to be written across multiple blockchains at the same time.

The Team

The team are very well connected with a wealth of experience at very senior roles at Global enterprises which I will include a few examples below. Gilbert Verdian the CEO was the Head of security for the payment infrastructure for the Bank of England through his CISO role with Vocalink (Mastercard)managing £6 trillion every year. This is treated by the government as critical national infrastructure which is the highest level of criticallity because its so fundamental to the security of the country. They have experience and know what it takes to run a secure financial infrastructure and meeting requirements of regulators. Gilbert was director for Cybersecurity at PWC, Security for HSBC and Ernst & Young as well as various government roles such as the CISO for the Australian NSW Health, Head of Security at the UK government for Ministry of Justice and HM Treasury in addition to being part of the committee for the European Commission, US Federal Reserve and the Bank of England.
Cecilia Harvey is the Chief Operating Officer, where she was previously a Director at HSBC in Global Banking and Markets and before that Director at Vocalink. Cecilia was also Chief Operating Officer at Citi for Markets and Securities Services Technology as well as working for Barclays, Accenture, IBM and Morgan Stanley.
Vijay Verma is the Overledger platform lead with over 15 years of developer experience in latest technologies like Java, Scala, Blockchain & enterprise technology solutions. Over the course of his career, he has worked for a number of prestigious organisations including J&J, Deutsche, HSBC, BNP Paribas, UBS Banks, HMRC and Network Rail.
Guy Dietrich, the managing director of Rockefeller Capital (manages $19 Billion in assets) has joined the board of Quant Network, and has recently personally attended meetings with the Financial Conduct Authority (FCA) with Gilbert
https://twitter.com/gverdian/status/1168628166644183042
As well as advisors such as Paolo Tasca, the founder and Executive Director of the Centre for Blockchain Technologies (UCL CBT) at University College Londonfounder and executive director as well as Chris Adelsbach, Managing Director at Techstars, the worldwide network that helps entrepreneurs succeed. Techstars has partners such as Amazon, Barclays, Boeing, Ford, Google, Honda, IBM, Microsoft, PWC, Sony, Target, Total, Verizon, Western Union etc.
Due to client demand they are expanding to the US to setup a similar size office where board members such as Guy Dietrich will be extremely valuable in assisting with the expansion.
The most exciting part about the project though is just how much adoption there has been of the platform, from huge global enterprises, governments and cloud providers they are on track for a revenue of $10 million in their first year. I will go through these in the next article, followed by further article explaining how the Token and Treasury works.
You can also find out more info about Quant at the following:
Part One — Blockchain Fundamentals
Part Two — The Layers Of Overledger
Part Three — TrustTag and the Tokenisation of data
Part Four — Features Overledger provides to MAPPs
Part Five — Creating the Standards for Interoperability
Part Six — The Team behind Overledger and Partners
Part Seven — The QNT Token
Part Eight — Enabling Enterprise Mass Adoption
Quant Network Enabling Mass Adoption of Blockchain at a Rapid Pace
Quant Network Partner with SIA, A Game Changer for Mass Blockchain Adoption by Financial Institutions
submitted by xSeq22x to CryptoMoonShots [link] [comments]

r/Bitcoin recap - March 2018

Hi Bitcoiners!
I’m back with the fifteenth monthly Bitcoin news recap.
For those unfamiliar, each day I pick out the most popularelevant/interesting stories in Bitcoin and save them. At the end of the month I release them in one batch, to give you a quick (but not necessarily the best) overview of what happened in bitcoin over the past month.
And a lot has happened. It's easy to forget with so much focus on the price. Take a moment and scroll through the list below. You'll find an incredibly eventful month.
You can see recaps of the previous months on Bitcoinsnippets.com
A recap of Bitcoin in March 2018
submitted by SamWouters to Bitcoin [link] [comments]

The History, The Current State And The Future Of NavCoin

The History, The Current State And The Future Of NavCoin

This is it. If you're interested to see what NAV is all about, this is the ultimate guide for you. You will learn about the history of NavCoin and how it evolved. You will learn about the current state and features of NavCoin and you will learn about the exciting new features that are planned and coming up in the (near) future.
So buckle up, this is going to be a long ride!

Table Of Content


Introduction - What is NavCoin?


The History

Introduction
The following chapter will summarize and break down the history of NavCoin in a few sentences. NAV started a long time ago, went through rebrandings and changes of the core team before it became what it is today.

SummerCoin
NavCoin was initially first introduced under the name SummerCoin on April 23 in 2014. SummerCoin was a fork of the Bitcoin blockchain. It used to have a PoW/PoS hybrid algorithm with a block time of 45 seconds.

SummerCoinV2 /NavajoCoin
Soon after the initial launch of SummerCoin, the original developer left and SoopY (soopy452000 on bitcointalk) took over as the main developer and rebranded the project to SummerCoinV2 respectively NavajoCoin and introduced new features.
The name NavajoCoin was chosen in honor of the Navajo Code Talker. The unbreakable Navajo code was used to encrypt highly classified military information and commands and decrypt the same in WW II.
SoopY introduced a technology which allowed sending transactions anonymously and private. This technology was called "Navajo Anonymous Technology". SoopY also released a new wallet and set the Proof of Stake rewards at 10% for the first year, 5% for the second year and 2% for every year after.

NavCoin
On August 12, 2014, Craig (current lead core developer, pakage on bitcointalk) started to get involved with NAV by helping to set up a website [10].
It was officially announced that Craig joined the core team as a "Wallet & Web Developer" on November 06, 2014.
The last tokenswap and restart of the blockchain of NAV happened on May 12, 2016.
Soon later, SoopY stopped showing up and Craig stepped into the role of the lead core developer. Since then, Craig has assembled a strong team with which he built NavCoin into what it is today.
Currently, Craig and the NavCoin Core team is located in New Zealand and they are actively developing many ground-braking features which differentiate NAV from other cryptocurrencies. You will read more about that later in this article.

The Current State

Introduction
The year 2018 has been a thriving year for the NavCoin ecosystem. Despite the USD price of NAV not reflecting it, in 2018 the core team has developed a whole bunch of new features. Also the core content creators published the first official guidelines that function as an orientation guide for community content creators. This chapter will give you an overview of the current team, the features, the prior mentioned guidelines and the community of NavCoin.

Core Team [1]
Last year, the core team has grown alot. It contains of developers, content creators and interns. The core team are employees of Encrypt S, the New Zealand's leading blockchain R&D lab. Encrypt S is developing blockchain solutions since 2014 and values building open-source software highly.

Craig MacGregor - Chief Executive Officer
Craig is the CEO of Encrypt S and the founder of NavCoin. He is one of the world's most experienced blockchain developers. Craig founded NavCoin in 2014 and is developing software for it since then. He has assembled a strong team of like-minded people. Craig also speaks at seminars and conferenced. Some of the companies and conferences he did blockchain education sessions at are Oracle, Xero, Air New Zealand, Blok Tex and trademe. Together with the team, he is also doing a education series on YouTube where he explains upcoming features in-depth for the community.

Alex Vazquez - Chief Technical Officer
Alex is the CTO of Encrypt S and the most active contributor to the NavCoin core Github. He has incredible knowledge of blockchains and proposes and implements solutions for challenges and features. He supports community developers frequently and answers any questions of the community thoroughly. Like Craig, Alex is developing software for the NavCoin ecosystem for a very long time. Alex speaks at universities at times and educates students about the blockchain technology.

Paul Sanderson - Lead Software Engineer
Paul is the Lead Software Engineer at Encrypt S. He has a flair for technology. His technical and management skills are perfectly suited for consultancy and investment advising. He also frequently contributes to the NavCoin core source code.

Rowan Savage - Senior Software Engineer
Rowan is a full stack software engineer with more than a decade experience in developing complex front-end web applications. He joined Encrypt S in February 2018 and has since been involved in the Valence Plattform, the Kauri Wallet and NavCoin Core. You will read more about these feature/projects later.

Carter Xiao - Lead UX/UI Designer
Carter specializes in user-centric design and is also very talented with 3D animation, motion graphics and programming. One of NavCoins core principle is "Simplifying Crypto" and UX/UI is a very important part of that.

Matt Paul - Software Engineer
Like Rowan, Matt is a full stack Software Engineer. He joined the core team in Mai 2017 and has since worked on NavPay, NavPi, the Kauri Wallet and NavCoin Core. Kieren Hyland - Chief Strategy Officer Kieren is one of the employees that are working for Encrypt S for a very long time. He is the CSO and is a digital strategist and growth hacker with a passion for new technology and has a lot of experience in online marketing. Laura Harris - Creative Director Laura has a combination of commercial and creative flair. She manages the social media accounts for NavCoin and ensures, that NavCoins' message is always powerful, relevant and distinctive. John Darby - Content Creator John is an internationally awarded Technology and Financial sector marketing communications specialist. He is one of the Core Content Creators for NavCoin.

Features of NavCoin [2]
The following features are currently available and have been developed in the last months and years. It is sorted from newest to oldest.

Static Block Reward
The soft-fork for the enabling of static block rewards have been accepted and became active recently at 5th January 2019. This means, that the block reward was changed from a percentage based reward to a static reward. This will incentivize the stakers to have their node online 24/7 which increased the security of the network. It also aligns NavCoin with the PoSv3 specification. With this implementation, the yearly inflation will be 3.6% currently and will exponentionally decrease because of the static value of the rewards. Every staked block will now give the staker 2 NAV. Depending on how many people are staking, the yearly percentage varies. With the network weight currently being around 20'000'000 NAV, stakers earn around 10% rewards from staking 24/7.

Cold staking
To provide extra security to participants in the staking process in the NavCoin network, the core team decided to implement cold staking. This allows to store NAV offline and still be able to sign staking inputs. Looking forward, a possible integration into the Ledger Nano S would mean, that one can stake NAV securely from a offline hardware wallet. How cool is that?

OpenAlias
One of the core principle of NAV is to simplify cryptocurrencies. Many non-technical people are deterred from the long, cryptic addresses used in wallets. When sending funds, you have to make sure that every single letter and digit is correct which is nerve-wracking for the average person. NavCoin has implemented OpenAlias, which allows to transform the wallet address into a email-like form. Everyone can register a name like "[[email protected]](mailto:[email protected])". Funds can then be sent to this name, which makes sending crypto much easier and less error-prone.

Community Fund
This is the one big feature I was most excited about. NavCoin core has implemented the first fully decentralized community fund. Acceptance of proposals and release of funds is all approved by the decentralized network. No central authority has access to the fund. The community fund enables everyone to propose their ideas to the NavCoin community and to get paid to implement these ideas. Everyone can propose whatever they like (of course there is a higher rate of success if the proposal contributes to the NavCoin ecosystem ;-)). In fact, this article was sponsored by the NAV-Community by voting "yes" for my proposal. The fund works like this:
For a fee of 50 NAV, everyone can create and present his idea/proposal to the entire NavCoin network. The fee is here to help prevent spam attacks. Proposals can literally be anything - be it development, marketing or anything else you can some up with.
After creating the proposal, everyone contributing to the NavCoin network can then decide if they like the proposal of not. They vote with "Yes" or "No" for the acceptance of the proposal. Voting happens via staking. Every transaction that gets validated by you gives you one vote. This means that the more NAV you are staking, the higher your voting weight is.
The proposal stays in the state "Pending" until it is accepted or rejected. To be accepted, a proposal has to have a participation of at least 50% of all staked blocks and at least 75% of these votes have to be "Yes"-votes. Like-wise to be rejected a proposal need 50% participation of the network and 75% of these votes have to be "No"-votes. Additionally, if a proposal didn't pass after 6 voting cycles (about 6 weeks) it is also rejected.
After a proposal has been accepted, the creator of the proposal can start his work. When the work is finished, or at in the proposal defined checkpoints, the proposal creator can create a payment request for the full or part of the requested funds.
The NavCoin network can then again decide, if the work is what the creator promised to do and vote for the funds or reject the payment request because it was not what he promised. This mechanism ensures, that the funds are only release if the creator of the proposal did what he promised. The NavCoin network decides everything, there is no central authority which makes the community fund 100% decentralized.
The community fund is quite new but there have already been some proposals that were accepted like paying for the development & hosting of NAV block explorer, the creation and distribution of NAV car stickers to the community for free (or paid by the community fund), the funding of interns for NavCoin Core, translation of the website into other languages and YouTube videos. What ideas could you come up with? By the way: this article was also sponsored by the community fund :-)

Proof of Stake
Like said before, NavCoin uses the Proof of Stake algorithm to create and validate blocks. Participants of the NavCoin network can earn rewards by putting their coins to stake and thus validating blocks and securing the network. The reward used to be 4% fixed but recently changed with the implementation of PoSv3. Currently, rewards for stakers that are staking 24/7 is about 10% but it is dependent on how many people are staking. If more nodes come online, this reward will go down. If 90% of all NAVs would be at stake, stakers would still earn 4%.

Tutorials And Guidelines [3]
The NavCoin Core team pushes the community to contribute to the NavCoin ecosystem constantly. They emphasize that NavCoin is an open source project and everyone can contribute. The team tries to make it as easy as possible for the average person to contribute and thus created different tutorials and guidelines.

Tutorials To Contribute To The Website
The whole website is open source. Everyone can contribute to the website. The team created different guides for people to follow [4].

The NavCoin Developer Manifesto
The content creator core team has build a developer manifesto. It defines the values that should be uphold like for example that they will always operate in the best interest of the network. If defines the principles, purposes, scope of involvement and operational requirements [5].

The NavCoin Content Creation Manifesto
Similar to the developer manifesto, there is also a content creation manifesto. Again it defines the principles for creating content, the purpose, the scope of involvement and the operational requirements [6].

NavCoin Brand Guidelines
In addition to the content creation manifesto, there is also a brand guideline booklet. This should help content creators to create images, videos, articles etc. in the same style as the core team. It defines the NAV brand. The brand guidelines contain definitions, the language to use (words to use, words not to use), the tone of voice, what the community aspires to be and what we discourage to be. It also contains the logo pack which can be used in graphics etc. It describes correct logo spacing, logo placement, the colors of NAV and different web assets. It gives tips about gradients and overlays, the typefaces (with a font pack) and many more. Check it out yourself [7].

NavCoin Educational Series
The core team has decided to actively involve the community in the creation of new features. For this reason and to allow users to ask questions, they created the NavCoin Educational Series. The core team schedules an online live meetup which can be joined by everyone. On YouTube they do live-streams and explain upcoming features. Examples of these series are explanations for cold staking, static rewards (PoSv3) and the community fund. The community can ask questions live and the core team will answer them immediately.

Community
During the last year there have been an influx of software developers from the community starting to create features for NAV.

navexplorer.com
An examples is navexplorer.com which is programmed by community developer prodpeak and is a block explorer for NavCoin. Additionally, it functions as a interface to see what is going on in the community fund. It shows pending proposals and payment requests.

NEXT Wallet
The NEXT Wallet is an alternative wallet for NAV and other cryptocurrencies. It has a beautiful user interface and is additionally the easiest interface to interact with the community fund (create proposals, create payment requests and vote for proposals and payment requests). It is programmed by community developer sakdeniz who put hundreds of hours into it during last year.

There were also some marketing activities starting to emerge with the release of the community fund. Some of these were for example free stickers for everyone in the NAV community to stick to their car / shop / window etc. or YouTube videos of CryptoCandor and Cryptomoonie that explained the details of NAV. I am sure, that with the 500'000 NAV available in the community fund per year there will be an influx of gread ideas - development as well as marketing activities - that will be funded.

The Future

Introduction
These features are planned for the future. Many of the following features are part of the 2019 roadmap. Some will not be described in great detail because not much is known about them yet. I've still listed them as they are part of what is yet to come.

Features
Rimu - Improved Privacy Solution
NavCoin used to be a optional privacy coin. That means, that you could choose to send a transaction in private. NavCoin was criticized for the way it handles private payments because it relied on a few servers which didn't make it that decentralized. The technology was called "NavTech" and was a secondary blockchain that obscured the transaction and the amount that was sent. NavCoin Core is currently developing a new improved privacy solution that will make the private payment system completely trustless and districuted and runs at a protocol level. Alex of the NavCoin Core team has published a paper that describes this new privacy solution. It's called Zero Confidential Transactions and can be found here: https://www.researchgate.net/publication/330366788_ZeroCT_Improving_Zerocoin_with_Confidential_Transactions_and_more. What I want to highlight is the collaboration between Alex as the proposer of the solution and the Veil team, a Bitcoin Core developer and Moneros main cryptographer as reviewers. When the best work together, it will be interesting to see what the outcome is!

Valence Plattform [8]
Valence is an applied Blockchain platform that can help businesses realise the tangible benefits of blockchain. You can think of Valence as a platform with which you can build Anonymous Distributed Applications (aDapps) with. But Valence is a different kind of platform that enables developers to create new types of blockchain applications. The problem with current (turing complete) dApp platforms are their complexity and rigid nature. Security holes in smart contracts and scaling issues happen frequently [9].
Valence provides transitional pathways that let businesses migrate only part of their activities to the blockchain without having to restructure their entire business model [9].
Valence will provide a spectrum of blockchain application solutions which sit along the decentralized spectrum, offering businesses simple ways to dip their toes into the blockchain at minimal risk or complexity [9].
Thanks to the proof of stake nature of the Valence blockchain, more of a node's resources can be used for processing and routing application data which makes the platform faster and scalable.
Valence aims to make building blockchain applications as accessible to the general public as WordPress or Squarespace has made building websites.
The developers NavCoin and Valence aim to make Valence extremely easy to work with:
A Valence application could be an open source mobile or web application that submits unencrypted or encrypted data directly to the blockchain. The only configuration necessary for the app developer would be setting up the data structure. Once they've done that they can start writing to the blockchain immediately.
The Valence blockchain interface is language agnostic, meaning developers are free to build applications in whichever language they're familiar with, which greatly reduces the barrier to entry.
As the platform progresses, Valence will introduce more and more smart contract templates in collaboration with the development community. These will be like plugins that users can simply select and configure for their application, without having to reinvent the wheel and risk contract errors or spend countless hours of research to program them.

NavShopper
The following information is taken from the latest weekly news: NavShopper is a new project which will allow people to spend NavCoin on a growing list of retailers and service providers. NavShopper sits between traditional retailers accepting fiat and NavCoin users and purchases products on behalf of the user by managing the crypt-fiat conversion, payment and shipping. This project will unlock many more ways for people to spend NAV on existing websites/marketplaces without requiring each site to individually accept cryptocurrencies. Some of the prototypes we are working on include crediting your Uber account, buying products on Amazon and donating to charities.

Kauri Wallet
The Kauri Wallet aims to be an open-source, multi-currency wallet which functions as a foundation for other features.

Kauri Enhanced
Enhancements to the Kauri Wallet will allow multiple accounts, pin numbers, recurring payments and more.

Kauri DAEx
The Kauri DAEx is a Decentralised Atomic Exchange that utilises the features of the Kauri Wallet and enables users to create safe peer to peer atomic exchanges for any currency supported by the Kauri Wallet. NavDelta NavDelta will be a payment gateway that allows users to spend NAV at any business which accepts currencies supported by the Kauri Wallet. NavMorph NavMorph is a fusion of Rimu and Kauri DAEx and will allow to privately send every cryptocurrency supported by the Kauri Wallet.

Outro

If you have made it this far: Congratulations! You have learned about how NAV evolved, what its current state is and what the future will bring. To sum all up: NavCoin has made incredible progress during last year and released many long awaited features despite the bear market. Many more exciting features are yet to come and it's going to be very interesting to see where we will stand on this day next year.

Giveaway

Unfortunately, the giveaway was not possible in the cryptocurrency-subreddit because of their rules, so I'm doing it here :-) As a surprise, in the next 2 hours I am going to send some NAV to everyone who wants to try out the awesome features and NavPay you read about above.
To get your NAVs, all you have to do is the following:
If you liked the experience, I'd be happy to hear back from you :)

References

[1] https://encrypt-s.com/company/
[2] https://navcoin.org/en/roadmap/
[3] https://navhub.org/get-involved/
[4] https://navhub.org/how-to-guide/
[5] https://navhub.org/assets/NavCoinDeveloperManifesto.pdf
[6] https://navhub.org/assets/NavCoinContentManifesto.pdf
[7] https://navhub.org/assets/NavCoinBrandGuidelines.pdf
[8] https://valenceplatform.org/
[9] https://valenceplatform.org/learn/business-on-the-blockchain-made-easy/
[10] https://bitcointalk.org/index.php?topic=679791.msg8320228#msg8320228
submitted by crypto_sIF to NavCoin [link] [comments]

Groestlcoin September 2019 Development Release/Update!

For a more interactive view of changes, click here
In our current world; bordering on financial chaos, with tariff wars, Brexit and hyperinflation rife, you can count on Groestlcoin to consistently produce innovation that strikes to take the power away from the few and into the many, even after a full five and a half years of solid development.
Here is what the team has already announced in the last 3 months since the last development update:

What's Being Released Today?

Groestl Nodes

What am I?

Groestl Nodes aims to map out and compare the status of the Groestlcoin mainnet and testnet networks. Even though these networks share the same protocol, there is currently no way to directly compare these coins in a single location. These statistics are essential to evaluate the relative health of both networks.

Features

Source - Website

Groestlcoin Transaction Tool

What am I?

This is a tool for creating unsigned raw Groestlcoin transactions and also to verify existing transactions by entering in the transaction hex and converting this to a human-readable format to verify that a transaction is correct before it is signed.

Features

SourceDownload

Groestlcoin AGCore

What am I?

AGCore is an Android app designed to make it easier to run a Groestlcoin Core node on always-on Android appliances such as set-top boxes, Android TVs and repurposed tablets/phones. If you are a non-technical user of Groestlcoin and want an Android app that makes it easy to run a Groestlcoin Core node by acting as a wrapper, then AG Core is the right choice for you.

What's Changed?

Source - Download

Groestlcoin Electrum

What's Changed?

Android Electrum-Specific

OSXWindowsWindows StandaloneWindows PortableLinux - Android
Server SourceServer Installer SourceClient SourceIcon SourceLocale Source

Android Wallet – Including Android Wallet Testnet

What am I?

Android Wallet is a BIP-0032 compatible hierarchial deterministic Groestlcoin Wallet, allowing you to send and receive Groestlcoin via QR codes and URI links.

V7.11.1 Changes

Groestlcoin Java Library SourceSource - DownloadTestnet Download

Groestlwallet

What am I?

Groestlwallet is designed to protect you from malware, browser security holes, even physical theft. With AES hardware encryption, app sandboxing, keychain and code signatures, groestlwallet represents a significant security advance over web and desktop wallets, and other mobile platforms.
Simplicity is groestlwallet's core design principle. Because groestlwallet is "deterministic", your balance and entire transaction history can be restored from just your recovery phrase.

iOS 0.7.3 Changes

Android v89 Changes

iOS SourceAndroid Source - Android DownloadiOS Download

Groestlcoinomi Released

What am I?

Groestlcoinomi is a lightweight thin-client Groestlcoin wallet based on a client-server protocol.

Groestlcoinomi v1.1 Desktop Changes

Groestlcoinomi Android v1.6 Changes

Groestlcoin Java Library SourceAndroid Source
Android DownloadWindows DownloadMac OS DownloadLinux Download

Groestlcoin BIP39 Tool

What's Changed?

Source - Download
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Giveaway and infos about NAV and the 3 soon to be released Nav Coin developments: Valence, Community Fund & Cold Staking

Hi /CryptoCurrency
EDIT: Alright my friends I'm off to sleep now. But if someone decides to download NavPay and post the wallet I might still send him some NAVs tomorrow evening :P
I am a fan of NAV and I would like anyone of you to take a look at NAV Coin and what better way is there to do this with a giveaway so everyone can see for themselves how fast and easy NAV Coin is.
Additionally to the giveaway I want to give the interested ones of you some more infos & teasers about NAV and what I think makes it unique and valuable.

1. Giveaway

First the info about the giveaway so that the people who are only here for the free money don't have to scroll down a wall of text... I won't judge you - you do you! :-P But maybe some of you guys will come back later to read more about NAV after you see how nice the mobile wallet of NAV is.
To get some free NAVs, all you have to do is the following:
  1. Download the app NavPay from the Android Play Store
  2. Follow the steps to set up your mobile wallet
  3. Backup your private key (the random words) so you could restore your wallet if you phone breaks or sth. like that!
  4. Post your public address as a comment in this thread, so I can send you some NAVs
If you liked the experience, I'd be happy to hear back from you :) In the next 2 hours, I'll be giving away NAVs worth about $200 in total (but split up of course, so that everyone will get some to try out the mobile wallet NavPay etc.).
Some additional links:
Thats all for the giveaway, now follows the additional infos.

2. Additional Infos about NAV

Nav Coin has been publicly traded since mid 2014. It's a decentralized cryptocurrency which is built on the latest version of Bitcoin Core with many additional features and functionalities which differentiate Nav from other cryptocurrencies. I'm going to dive into the details of these features later on in this post.
The aim of Nav Coin is to simplify cryptocurrencies. In my opinion, this (the mainstream-adoption) is one of the most important topics for all cryptocurrencies in general. Nav is directly adressing this issue by providing very easy to use tools (wallet, mobile wallet, etc.).

2.2 Facts & Figures

2.3 Team

The team was recently expanded and consists now of the following people.
More infos and links to linked in about the core team is found on the first page of the official NAV website (just scroll down a bit).

2.3.1 Core developer contributors

2.3.2 Core content contributors

2.3.3 Community developers

Since NAV is open source and the core team is encouraging the community to contribute to NAV, there are many more people working on NAV like sakdeniz who is creating a second desktop wallet, slothmike who is working on a reddit tipbot or Prodpeak who is developing an alternative block explorer.

2.3.4 Weekly updates

The core team is releasing weekly updates about the ongoing projects on their website so that anyone interested can see the current status of the roadmap items.

2.4 Main Features

2.4.1 Optional Private Payments

With Nav Coin you have the ability to send private payments. The privacy is optional so you can choose to send non-private or private payments. Nav Coin uses a different approach to achieving privacy than other coins. Nav uses the so called NavTech. NavTech is a dual blockchain system. Essentially, the transaction information is encrypted, split in smaller transactions and sent through a second blockchain, which completely breaks any links between the sending and the receiving address. If you're interested in this technology, you can find the whitepaper on the official NAV website.
At the moment, private payments are processed by trusted servers. Everyone can operate a server themselves or can use the existing ones. The team is working on NavTech 2.0 'Rimu' which will make these servers obsolete, since every wallet will act as a private payment processor which will further push the decentralization.

2.4.2 Proof of Stake

Nav Coin uses the consensus model Proof of Stake which lets holders of Nav Coins earn a reward of 5% in interest of the coin they stake. Staking coins is very simple, you just have to have the wallet open and running.
5% rewards also mean, that there is an inflation of maximum 5% per year. But it is actually lower (at around 2-3%) since not all coins are staking. So if you are staking, you will earn more than the yearly inflation.
Here is a very detailed article about how Nav Coins Proof of Stake works.

2.4.3 Fast transaction times

Nav Coin has a really fast block speed. Transactions are confirmed as spendable withing only 30 seconds which makes it ideal for retail and e-commerce which in my opinion is one of the main points in real-life adoption. There was a video posted recently on the official twitter account which shows how NAV was used to purchase groceries in a store in Rome... That's real-life adoption!

2.4.4 NavPi

Like mentioned above, Nav Coin uses a Proof of Stake consensus model. Most of us have read about the immense energy consumption of Bitcoins Proof of Work model. In my opinion, this is not feasible for the future. With the PoS model of Nav Coin, you can stake your coins on a Raspberry Pi which uses only about 18kWh of power annually if run 24/7! This is much more environment friendly!
Nav Coin even sells their own preconfigured and ready to use NavPi Stakeboxes. Since they're out of stock very fast every time, you can create your own NavPi by following the step-by-step tutorial of the community member navtechservers

2.4.5 Community Fund

Since Nav Coin did not have an ICO or premine, they're fully self financed at the moment. The community has voted for a community fund which will propel the development and marketing of NAV greatly.
When the community fund is implemented, the PoS reward will be reduced from 5% to 4% per year. Each block will generate 0.25 Nav which will be allocated for the community fund (about 21'600 Nav per month).
Both the Nav Coin Core team and the community will be able to propose projects and budgets which the community (the stakers) will vote for. The payouts happen when everyone votes that the work is completed. The aim of this is to fund the development and ongoing success of NAV. You can read more about it here.

2.4.6 NavPay

NavPay is NAVs mobile wallet. It's one of the first mobile wallets that allows private payments. There are already real world merchants accepting Nav thanks to the NavPay app like Pasticceria Piemontese in rome and you can even pay for a cardiologic examination using Nav.
NavPay has a very simple and beautiful user interface. Download it for this giveaway and take a look yourself!

2.4.7 NavChange

Using a combination of lightning network transactions and exchange integrations, NavChange will be a Valence-powered application which facilitates instant exchange between NAV and other currencies
NavChange is a feature which is planned to be launched in 2018.
Here is an example of how it is possible to send Bitcoin anonymously with Nav Coins NavChange.
For the traders: NavChange will greatly increase the volume for Nav.

2.4.8 Valence Plattform (Anonymous Distributed Apps)

At the moment, Nav Coin is "just" a currency. But this is going to change in 2018. The team is in the latest phase of finishing the whitepaper of the Valence Platform which will enable the development of Anonymous Distributed Apps Platform (aDapps) (think of Ethereum's smart contracts, but with privacy!). Valence is a platform that gives developers and businesses a new set of tools to help them realize their ideas on the blockchain. The whitepaper is probably coming in the next 1-2 weeks!

Final thoughts

There are some people who will say that NAV tries to do too many things. I don't agree with these guys. I think this is the main point that speaks for NAV. NANO might be faster (even tho NAV is almost instant as well), XMR might have better privacy (used by Monero fans but never really proven), ETH might have a more accepted dApps platform (we'll see what the whitepaper brings)... but who combines all of these features in one project?
NAV is a jack of all trades.
Thanks for reading this far and now post your NAV public address so I can send you some NAVs! :-D
submitted by xVicious to CryptoCurrency [link] [comments]

How to keep your Bitcoin safe - Bitcoin Security, Private Keys, Hardware Wallets, 2FA how to get bitcoin address private key The All bitcoin private keys with balance Reviews.. How To Send Receive Bitcoin In Bitcoin Core Wallet  Bitcoin Transaction Keeping your private keys secure Getting your Private Keys from the Bitcoin Core wallet ... BIP38 Encrypting of your Bitcoin Private Key - YouTube

A private key, like a real key, unlocks your cryptocurrency for you to spend. It's just a really big number – so large that it would be impossible for anyone to guess. If you flip a coin 256 times and write down "1" for heads, "0" for tails, you'll end up with a private key. Here's one we've just generated. It's encoded in hexadecimal (using numbers 0-9 and characters a-f) for a more compact ... There are two key reasons why analysts expect Ether to perform strongly in the short term. First, the market capital of Bitcoin could move towards ETH after the announcement of Ethereum 2.0. Second, ETH has recently tested a critical resistance level, increasing the chances of a broader rally. With the help of public key encryption, parties who don’t know or trust each-other can engage in commerce, online. bitrated.com. Bitcoin Trust Platform - Identity & reputation management, multi-signature smart contracts and consumer protection for Bitcoin and other cryptocurrencies. jobs4btc-escrow.appspot.com; Using PGP and Cryptocurrency Keysignatures. Asymmetric Encryption: Phil Zimmerman ... Private keys gives access to public address in blockchain. Whenever you create a new wallet address (public address), a private key for the address is also generated. However for security reasons private keys are not displayed by your core wallet. You’ll have to export them using your wallet console. Torus Labs Private Limited, a Singapore-based private key management startup, has raised $2 million in a seed-funding round led by Multicoin Capital, the company announced in a blog post on July 9, 2019. The round included participation from Binance Labs, Accomplice, Coinbase Ventures, Sixth Horizon and Terminal. But at this level, no need to worry as for that change some time is required, accordingly a Bitcoin Core founder. No One Can Harm Your Bitcoin Wallet… So Far. One of the characteristics of Bitcoin is that if you are that who has a private label then you are the only able to access the BTC connected to that label. Just remember the saying ... Trade over 40 cryptocurrencies and enjoy the lowest trading fees in America. I created a website and add bitcoin payment option on it, create a new wallet on the blockchain, I have an API key from blockchain.info and xpub key, but for the transaction, I need a “bitcoin Secret key”. I just want to know that, every key have is own private key, so if i extract the private or secret key and add in site admin panel so it works for all. I am confused, In-wallet BIP38 Encryption. Yes (private key) No. No. No. Premine. No. No. No. Yes, 2 million Dash. Bitcoin 2 Core Wallets - v.2.3.1. Windows 64-bit exe zip. Linux 64-bit tgz 32-bit ARM/Rasp. Mac.dmg tar.gz. Staking Web Wallet. Github. Send me updates on Bitcoin 2 . Exchange BTC2. Crex24 has the most active BTC2 market, followed by Stakecube. Current Annual Yield. Masternode: 25.64% ...

[index] [6852] [304] [16268] [23477] [17128] [16795] [13817] [15785] [19867] [22839]

How to keep your Bitcoin safe - Bitcoin Security, Private Keys, Hardware Wallets, 2FA

how to get bitcoin address private key (software .and. additional method to find private keys ) THANKS FOR SUBSCRIBING MY CHANNEL I HONESTLY OWE YOU ONE USEFUL LINKS: https://shrinkme.io/wares How to send receive bitcoin in bitcoin core wallet. In this tutorial we are looking at how you can send and receive bitcoin easily. I will show you how to use bitcoin core to send and receive bitcoin. In this tutorial we are going to get our private keys from the bitcoin core wallet.This only works when you created the bitcoin address in the same wallet. Beca... Live Bitcoin Trading With Trading Robot DeriBot on Deribit DeriBot Backup 126 watching Live now Auto Fast scanner Balance Bitcoin Address & Private Key - Duration: 10:55. Binance AIR-DROP and Trading News - Binance Platform Growth Binance Exchange 70,469 watching Live now How to Set up 2-factor Authentication in Electrum Bitcoin Wallet - Duration: 16:15. Public and private keys - how to use the former one on your daily basis and how to protect the latter against access by an unauthorized persons. Security precautions in cryptocurrency world are a ... Keep your private keys safe by encrypting them in an industry-standard way. These guys can make you a custom laser-engraved BIP38 card: www.crypto-cards.com ...

#